Symptom: Individual Sprinkler Heads Not Working. One of the most common problems with a lawn. A malfunctioning valve can deal serious damage to your landscape or irrigation equipment. Therefore, tackle valve repairs as soon as you notice.
- An old Richdel antisiphon valve leaks. Might be the diaphragm since it's more than 10 years old and our water out here is quite heavily chlorinated. Tried turning on/off, no help. Anyhow, I can't totally shut the water off to that valve since the turn-off is right at the meter and those old things never fully close.
- Irritrol 100236 1' Valve Replacement Diaphragm For Irritrol 2400, 2700DPR, 2600 Valves Fits Irritrol 2400, 2700DPR, 2600 Valves listed below: 2400S 2400SF 2400T 2400TF 2400T-B 2400TF-B 2400T-M 2400TF-M 2600T 2600TF 2711DPR 2713DPR Helpful Articles & Videos Articles How To Replace An Irrigation Valve Diaphragm Repair or Replace an Irrigation Valve?
All Irritrol controllers and valves have online troubleshooting guides to help you quickly figure out what’s gone wrong and how to fix it. Click on the appropriate product below to get started.
Samsung baseband version. Customer Support Blackweb gaming pc.
Have an irrigation question or problem? Get your solution here, right now!
Call us toll-free at 1-800-634-TURF (8873) Monday through Friday from 7:30AM to 4:00 PM (PST)
If you are looking for FAQ's on troubleshooting Irritrol products, click here.
Timers
| Cause | Solution |
|---|
| Multiple start times set | Check program and turn off all but one start time |
| Season adjust is set at more than 100% | Reset Season adjust |
| Cause | Solution |
|---|
| Faulty valve solenoid | Replace solenoid |
| Damaged or shorted wiring | Inspect and repair wire |
| Faulty timer | Replace timer |
| Cause | Solution |
|---|
| No power to timer | Check outlet for power |
| Faulty transformer | Replace transformer |
| Blown fuse | See above (fuses) |
| Cause | Solution |
|---|
| Timer is off | Turn timer on |
| Blown fuse | See above (fuses) |
| Damaged timer/ valve wiring | Repair wire |
| Faulty transformer, timer or rain sensor device | Replace timer, sensor or transformer |
| Damaged wiring at timer or one manifold | Repair wiring |
| Cause | Solution |
|---|
| Damaged wiring at timer or one manifold | Repair wiring |
| Cause | Solution |
|---|
| Damaged wiring at timer and zone | Repair wire |
Valves
| Cause | Solution |
|---|
| Main water supply valve is off | Turn supply valve on |
| Faulty valve solenoid | Replace solenoid |
| Flow control at valve is closed | Open fully counterclockwise |
| Zone valve wires not connected | Connect wires |
| Debris in valve, solenoid or metering orifice | Disassemble valve and clean with fresh water |
| Cause | Solution |
|---|
| Faulty valve diaphragm | Replace diaphragm |
| Faulty valve | Replace valve |
| Damaged or cracked valve body | Replace valve |
| Damaged or cracked bonnet | Replace valve |
| Cause | Solution |
|---|
| Damaged or cracked pipe and fittings | Check and replace as needed |
| Damaged diaphragm | Replace diaphragm |
| Cause | Solution |
|---|
| Debris between diaphragm and diaphragm seat | Clear debris from valve |
| Damaged diaphragm | Replace diaphragm |
| Debris in solenoid | Clean solenoid |
| Faulty solenoid | Replace solenoid |
| Valve manual bleed open | Tighten by hand |
Rotors
| Cause | Solution |
|---|
| Internal basket screen plugged with debris | Clean screen |
| Cause | Solution |
|---|
| Not enough water pressure to rotate sprinkler | Split zone in two |
| Debris in sprinkler head | Clean debris from sprinkler |
| Faulty sprinkler head | Replace sprinkler |
| Cause | Solution |
|---|
| Not enough water pressure to rotate sprinkler | Split zone in two |
| Faulty sprinkler head | Replace sprinkler |
| Missing nozzle | Replace nozzle |
Sprinklers
| Cause | Solution |
|---|
| Not enough water pressure to run the zone | Split the zone in two |
| Master or zone valves not completely open | Open counterclockwise |
| Flow control on zone valve not fully open | Open flow control |
| Debris between sprinkler riser and riser seal | Clear debris |
| Cause | Solution |
|---|
| Damaged riser or riser seal | Replace sprinkler |
| Damaged retraction spring | Replace sprinkler |
| Radius adjustment screw turned off | Open counterclockwise |
| Debris in nozzle | Remove debris |
| Cause | Solution |
|---|
| Missing nozzle | Install nozzle |
| Faulty or missing sprinkler head | Replace sprinkler |
WHERE TO BUY
LOCATE A DISTRIBUTOR
Richdel Sprinkler Valve Leaking Assembly
A to z bollywood mp3 songs pk. Great news!
If your sprinkler timer has failed, or there is an issue with the wiring, it is still possible to turn on the sprinkler zone manually, by opening the valve with your hands.
This way you don’t have to run back and forth between the timer/controller and the zone you are watering.
Opening the valve manually is very useful if you are checking out a sprinkler system. This is because you can open a sprinkler valve without using the sprinkler timer. This is a huge time saver, especially if the timer happens to be in the basement, in the garage, or another room in the house. This way you don’t have to run back and forth between the timer/controller and the zone you are watering. If you have multiple valves in a manifold, you can open them all in a single location.
There are 2 simple methods to open the valve manually:
1. Open the Manual Bleed Screw
The first way to open this valve is to open the manual bleed screw. You will notice that the manual bleed screw is located towards the back of the valve near the flow control. To open the valve manually, twist the manual bleed screw counter-clockwise until the valve opens. It usually doesn’t need to be more than one-half turn. To close the valve turn the manual bleed screw clockwise until the valve closes. Note: opening the manual bleed screw will cause water to leak out, this is normal, and there is no reason to be alarmed.
2. Turn the Solenoid
The second way to open the valve is to grasp the solenoid (the black cylinder with the wires attached to it) and turn it approximately one-quarter turn counter-clockwise until the valve opens. To close the valve, turn the solenoid clockwise until the valve closes. This is the method that many prefer because most times when you open the manual bleed screw, it causes water to leak out into the valve box. If the valve is left on for any period of time, it can start filling the valve box with water. Usually opening the valve by twisting the solenoid doesn’t leak water into the valve box.
So the next time your sprinkler system is not working correctly, and you need to apply water, try operating the zone valve manually.
Richdel Sprinkler Valve Leaking Drain Plug
Happy sprinkling!